Home
Register
Login
Album list
Last uploads
Last comments
Most viewed
Top rated
By date
My Favorites
Search
Belfield Ashing Facility
Location: The Belfield facility site is located about one mile southeast
of the town of Belfield in Stark County, North Dakota.
Background: Union Carbide Corporation (UCC) built and operated the facility in the early 1960s to burn uraniferous lignite coal. The plant had a capacity of 100 tons of ore per day and was operated from July 1965 to November 1967. The plant site was located near the mines to decrease the freight haulage costs. Burning the lignite concentrated the uranium values in the ash product that was directly amenable to further processing at the company’s Rifle, Colorado, uranium mill. The raw lignite ore, which contained 35-50 percent moisture by weight, was burned in a natural gas fired, rotary kiln to decompose and drive off the organic constituents and carbon. The kiln was 8 feet in diameter by 125 feet in length, and it operated at 1,300°F to 1,600°F depending on the lignite feed quality. The lignite ore averaged about 0.37 percent U3O8, and the uranium values were concentrated in the ash by the burning process. Uranium recovery in the ash product averaged 93 percent. During burn operations, ash dust from the kiln was collected by a wet scrubber and was returned to the rotary cooler/discharge unit where the hot ash emerged from the kiln. The original plant site covered about 11 acres. In 1980, a U.S. Department of Energy survey of the area showed that an additional 21 acres contiguous to the site were contaminated by low amounts of a wind-blown ash residue, apparently released during plant operations. The volume of contaminated soil at the site is estimated to be about 57,000 cubic yards. No clearly defined process-residue piles or waste ponds exist at the site Sludge-pit areas may possibly be buried at the site. The Belfield site is owned by private interests.
of the town of Belfield in Stark County, North Dakota.
Background: Union Carbide Corporation (UCC) built and operated the facility in the early 1960s to burn uraniferous lignite coal. The plant had a capacity of 100 tons of ore per day and was operated from July 1965 to November 1967. The plant site was located near the mines to decrease the freight haulage costs. Burning the lignite concentrated the uranium values in the ash product that was directly amenable to further processing at the company’s Rifle, Colorado, uranium mill. The raw lignite ore, which contained 35-50 percent moisture by weight, was burned in a natural gas fired, rotary kiln to decompose and drive off the organic constituents and carbon. The kiln was 8 feet in diameter by 125 feet in length, and it operated at 1,300°F to 1,600°F depending on the lignite feed quality. The lignite ore averaged about 0.37 percent U3O8, and the uranium values were concentrated in the ash by the burning process. Uranium recovery in the ash product averaged 93 percent. During burn operations, ash dust from the kiln was collected by a wet scrubber and was returned to the rotary cooler/discharge unit where the hot ash emerged from the kiln. The original plant site covered about 11 acres. In 1980, a U.S. Department of Energy survey of the area showed that an additional 21 acres contiguous to the site were contaminated by low amounts of a wind-blown ash residue, apparently released during plant operations. The volume of contaminated soil at the site is estimated to be about 57,000 cubic yards. No clearly defined process-residue piles or waste ponds exist at the site Sludge-pit areas may possibly be buried at the site. The Belfield site is owned by private interests.
1 files on 1 page(s)